E045S

Electronic control unit

Use application field

For 230V swing-leaf gate automations

If interested in this product, see also:

  • The E045S electronic control unit can command one or two operators
  • Thanks to the new 2easy and OMNIdec technologies it is compatible with the XF 433/XF 868 quick insert module (connector set-up), with the external receivers and with XP 15B and XP 20B D photocells (“BUS” connection).
  • The BUS XIB interface is provided for the connection of traditional photocells.

Model

Item code

E045S

790077

Model

E045S

Power supply voltage

220-240V~ 50/60 Hz

Max. power

4W Stand by W

Motor max power

800W

Max. accessories load

500 mA 24V – 500 mA BUS 2easy

Max. electric lock load

FAAC lock (12V~ – 24V )

Programming

LED display and buttons, via Simply Connect connectivity devices

Status signalling

Display and LED

Terminal board inputs

Open, Open pedestrian leaf, Stop (closed), BUS 2easy, Power + Earth

Terminal board outputs

Lamp, Motors, Accessories power supply 24V2 ,Indicator light 24V , Electric lock power supply 12V~

Rapid connector

XF 433/868 module for OmniDEC decoding, USB-A and Simply Connect

Protection Fuses

1 (2.5A)

Operating ambient temperature

-20°C ÷ +55°C

Note: The E045S control unit can control one or two operators

Basic programming

Operating logic

Semiautomatic, Automatic, Semi-automatic step-by-step, step-by-step Auto, Auto Security stepper, Semi-automatic B, C Deadman

Pause time

Programmable (from 0 to 9 min 50 sec)

Number of motors

Selectable

Thrust power

Adjustable on 50 levels for each motor independently

Encoder use

Selectable

Leaf delay time in closing

Programmable (from 0 to 1 min 30 sec)

BUS 2-Easy device registration

Selectable

Motor Power

1 and 2 (independently)

Working time learning

Simple self-learning (max 4 min and 10 sec).

Self-learning working and deceleration time of two leaves in one complete working cycle only. With SAFEcoder absolute encoder, the open/closed/deceleration positions are learned

Advanced programming

Reversing stroke and ram stroke

Selectable (to facilitate the release and the electric lock)

Leaf delay in opening

Selectable

Leaf 1 deceleration

Programmable, percentage of the total stroke (from 0% to 99%)

Leaf 2 deceleration

Programmable, percentage of the total stroke (from 0% to 99%)

Pre-Flashing

Anti-crushing sensitivity

Programmable there is an ENCODER (10 levels)

Mechanical stop angle search

Selectable if the ENCODER is present

Files management through USB-A

Board software Upgrade

Selectable

Board configuration Upload

Selectable

Radio codes list Upload

Selectable

Configuration download from board

Selectable

Radio code download from board

Selectable

Simply Connect

The Simply Connect quick connector allows the use of connectivity devices that permit remote programming and management via web and/or App of all the automations connected to the Simply Connect cloud platform: carry out diagnosis, investigate faults, perform remote maintenance and schedule your work

IMPORTANT: the electronic board E045S, thanks to the new technologies is only compatible with the XF 433/XF 868 receiver (provided with connector) and with XP 20B D and XP 30B photocells (“BUS” connection). For the connection of the traditional photocells, the XIB BUS interface is provided.

Enclosure mod. E for electronic control units

720119

||valuta|| ||720119||

Enclosure mod. L for electronic control units

720118

||valuta|| ||720118||

Enclosure mod. LM for electronic control units

720309

||valuta|| ||720309||

Release lock with key for mod. L and LM

712805

||valuta|| ||712805||

BUS XIB interface

(for E045 or E045S or E024S boards with photocell no BUS)

790062

||valuta|| ||790062||