XS

Conductive rubber edge

Type of device

Plug&Play conductive rubber edge

  • Plug and Play conductive rubber safety edge 8,2 Kohm
  • Easier assembly due to the innovative solution with mechanically coupled terminals (except XS10)
  • Rubber profile heights 10mm/30mm/55mm/85mm
  • Aluminium support profile
  • Obstacle detection with +/- 45° angles
  • Protection class IP 65
  • Available in KIT VERSION (for more than one safety edge) or in CUSTOM KITS (for one safety edge up to 2,5 m)
  • The XS edges need a CN 60 E control unit (see page 959eca8c-e869-4b15-ad09-b223d67916b1)or the radio system of the edges (see page 667a23b7-1eda-42b8-80a9-f13e38acc572)

Model

Description

Item code

CUSTOMISED KIT

Safety edge up to 2.5 m

XS10 SAFETY EDGE KIT (L=2.5M)*

105536

XS30 SAFETY EDGE KIT (L=2.5M)*

105538

XS55 SAFETY EDGE KIT (L=2.5M)*

105531

XS85 SAFETY EDGE KIT (L=2.5M)*

105547

*THE KIT CONTAINS:

1 rubber profile XS 2.5m; 1 terminal with XSP R8.2 resistance; 1 terminal with XSP C0.5 cable; 1 aluminum profile for XS 2.5m

1. Cut the rubber profile to the desired length.

  The cut must be precise to ensure correct coupling with the terminals; it is recommended to use a cutter that holds the profile in position.

2. Remove the 8K2 resistance.

  Insert the support as far as it will go.

3. Insert the terminal as far as it will go into the support.

4 Insert the cover into the rubber profile by engaging the coupling with the press on seat.

  The conductive rubber edge is ready to be fixed on the aluminium supporting profile.

CN 60 E Control unit

785200

||valuta|| ||785200||

XT S 868 transmitter

787012

||valuta|| ||787012||

XR S 868 receiver

787013

||valuta|| ||787013||

XS10 Glue and Primer kit

105535

||valuta|| ||105535||